|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD - 94357 SMPS MOSFET IRFB52N15D IRFS52N15D IRFSL52N15D HEXFET(R) Power MOSFET l Applications High frequency DC-DC converters VDSS 150V RDS(on) max 0.032 ID 60A Benefits Low Gate-to-Drain Charge to Reduce Switching Losses l Fully Characterized Capacitance Including Effective COSS to Simplify Design, (See App. Note AN1001) l Fully Characterized Avalanche Voltage and Current l TO-220AB IRFB52N15D D2Pak IRFS52N15D TO-262 IRFSL52N15D Absolute Maximum Ratings Parameter ID @ TC = 25C ID @ TC = 100C IDM PD @TA = 25C PD @TC = 25C VGS dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torqe, 6-32 or M3 screw Max. 60 43 240 3.8 320 2.1 30 5.5 -55 to + 175 300 (1.6mm from case ) 10 lbf*in (1.1N*m) Units A W W/C V V/ns C Thermal Resistance Parameter RJC RCS RJA RJA Notes through Junction-to-Case Case-to-Sink, Flat, Greased Surface Junction-to-Ambient Junction-to-Ambient Typ. --- 0.50 --- --- Max. 0.47 --- 62 40 Units C/W are on page 11 www.irf.com 1 12/12/01 IRFB/IRFS/IRFSL52N15D Static @ TJ = 25C (unless otherwise specified) Parameter Drain-to-Source Breakdown Voltage V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) Gate Threshold Voltage V(BR)DSS IDSS IGSS Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Min. 150 --- --- 3.0 --- --- --- --- Typ. --- 0.16 --- --- --- --- --- --- Max. Units Conditions --- V VGS = 0V, ID = 250A --- V/C Reference to 25C, ID = 1mA 0.032 VGS = 10V, ID = 36A 5.0 V VDS = VGS, ID = 250A 25 VDS = 150V, VGS = 0V A 250 VDS = 120V, VGS = 0V, TJ = 150C 100 VGS = 30V nA -100 VGS = -30V Dynamic @ TJ = 25C (unless otherwise specified) gfs Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Coss Coss Coss eff. Parameter Forward Transconductance Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance Min. 19 --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. --- 79 25 34 16 47 28 25 2770 590 110 3940 260 550 Max. Units Conditions --- S VDS = 50V, ID = 36A 120 ID = 36A 37 nC VDS = 120V 51 VGS = 10V, --- VDD = 75V --- ID = 36A ns --- RG = 2.5 --- VGS = 10V --- VGS = 0V --- VDS = 25V --- pF = 1.0MHz --- VGS = 0V, VDS = 1.0V, = 1.0MHz --- VGS = 0V, VDS = 120V, = 1.0MHz --- VGS = 0V, VDS = 0V to 120V Avalanche Characteristics Parameter EAS IAR EAR Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Typ. --- --- --- Max. 470 36 32 Units mJ A mJ Diode Characteristics IS ISM VSD trr Qrr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time Min. Typ. Max. Units Conditions D MOSFET symbol 60 --- --- showing the A G integral reverse --- --- 240 S p-n junction diode. --- --- 1.5 V TJ = 25C, IS = 36A, VGS = 0V --- 140 210 nS TJ = 25C, IF = 36A --- 780 1170 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) 2 www.irf.com IRFB/IRFS/IRFSL52N15D 1000 VGS 15V 12V 10V 8.0V 7.0V 6.0V 5.5V BOTTOM 5.0V TOP 1000 ID , Drain-to-Source Current (A) 100 ID , Drain-to-Source Current (A) 100 VGS 15V 12V 10V 8.0V 7.0V 6.0V 5.5V BOTTOM 5.0V TOP 10 10 5.0V 1 5.0V 1 300s PULSE WIDTH Tj = 25C 0.1 0.1 1 10 100 0.1 0.1 1 300s PULSE WIDTH Tj = 175C 10 100 VDS, Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 1000.00 3.0 I D = 60A ID, Drain-to-Source Current ( ) 2.5 RDS(on) , Drain-to-Source On Resistance 100.00 (Normalized) T J = 175C 2.0 1.5 10.00 T J = 25C 1.0 1.00 5.0 7.0 9.0 VDS = 15V 300s PULSE WIDTH 11.0 13.0 15.0 0.5 0.0 -60 -40 -20 0 20 40 60 80 V GS = 10V 100 120 140 160 180 VGS, Gate-to-Source Voltage (V) TJ , Junction Temperature ( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRFB/IRFS/IRFSL52N15D 100000 12 VGS = 0V, f = 1 MHZ Ciss = C + Cgd, C gs ds SHORTED Crss = C gd Coss = C + C ds gd ID = 36A 10 V DS = 120V V DS = 75V V DS = 30V 10000 C, Capacitance(pF) Ciss 1000 VGS, Gate-to-Source Voltage (V) 7 Coss 100 5 Crss 2 10 1 10 100 1000 0 0 20 40 60 80 100 VDS, Drain-to-Source Voltage (V) Q G, Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 1000.00 1000 OPERATION IN THIS AREA LIMITED BY R DS(on) T J = 175C 100.00 ID , Drain-to-Source Current (A) ISD, Reverse Drain Current (A) 100 100sec 10 1msec 10.00 T J = 25C 1.00 VGS = 0V 0.10 0.0 0.5 1.0 1.5 2.0 2.5 VSD , Source-toDrain Voltage (V) 1 Tc = 25C Tj = 175C Single Pulse 1 10 100 10msec 0.1 1000 VDS , Drain-toSource Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRFB/IRFS/IRFSL52N15D 70 VDS 60 RD VGS RG D.U.T. + 50 -VDD I D , Drain Current (A) 40 10V Pulse Width 1 s Duty Factor 0.1 % 30 Fig 10a. Switching Time Test Circuit 20 VDS 10 90% 0 25 50 75 100 125 150 175 TC , Case Temperature ( C) 10% VGS td(on) tr t d(off) tf Fig 9. Maximum Drain Current Vs. Case Temperature Fig 10b. Switching Time Waveforms 1 (Z thJC ) D = 0.50 0.1 0.20 0.10 Thermal Response 0.05 0.02 0.01 0.01 SINGLE PULSE (THERMAL RESPONSE) Notes: 0.001 0.00001 1. Duty factor D = 2. Peak T J P DM t1 t2 +TC 1 t1 / t 2 = P DM x Z thJC 0.1 0.0001 0.001 0.01 t 1, Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRFB/IRFS/IRFSL52N15D 1 5V 900 VDS L D R IV E R 720 TOP ID 15A 26A 36A BOTTOM RG 20V tp D .U .T IA S + V - DD E AS , Single Pulse Avalanche Energy (mJ) 540 A 0 .0 1 360 Fig 12a. Unclamped Inductive Test Circuit 180 V (B R )D SS tp 0 25 50 75 100 125 150 175 Starting Tj, Junction Temperature ( C) IAS Fig 12c. Maximum Avalanche Energy Vs. Drain Current Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. QG 50K 12V .2F .3F 10 V QGS VG QGD D.U.T. VGS 3mA + V - DS Charge IG ID Current Sampling Resistors Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit 6 www.irf.com IRFB/IRFS/IRFSL52N15D Peak Diode Recovery dv/dt Test Circuit D.U.T + + Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer - + RG * * * * dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test + VDD Driver Gate Drive P.W. Period D= P.W. Period VGS=10V * D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt VDD Re-Applied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% ISD * VGS = 5V for Logic Level Devices Fig 14. For N-Channel HEXFET(R) Power MOSFETs www.irf.com 7 IRFB/IRFS/IRFSL52N15D TO-220AB Package Outline Dimensions are shown in millimeters (inches) 2 .8 7 (.1 1 3 ) 2 .6 2 (.1 0 3 ) 1 0 .5 4 (.4 1 5 ) 1 0 .2 9 (.4 0 5 ) 3 .7 8 (.1 4 9 ) 3 .5 4 (.1 3 9 ) -A6.4 7 (.2 5 5 ) 6.1 0 (.2 4 0 ) -B4 .6 9 (.1 8 5 ) 4 .2 0 (.1 6 5 ) 1 .3 2 (.0 5 2 ) 1 .2 2 (.0 4 8 ) 4 1 5 .2 4 (.6 0 0 ) 1 4 .8 4 (.5 8 4 ) 1 .1 5 (.0 4 5 ) M IN 1 2 3 L E A D A S S IG N M E N T S 1 - GATE 2 - D R A IN 3 - S OU RC E 4 - D R A IN 1 4 .0 9 (.5 5 5 ) 1 3 .4 7 (.5 3 0 ) 4 .0 6 (.1 6 0 ) 3 .5 5 (.1 4 0 ) 3X 3X 1 .4 0 (.0 5 5 ) 1 .1 5 (.0 4 5 ) 0 .9 3 (.0 3 7 ) 0 .6 9 (.0 2 7 ) M BAM 3X 0 .5 5 (.0 2 2 ) 0 .4 6 (.0 1 8 ) 0 .3 6 (.0 1 4 ) 2 .5 4 (.1 0 0) 2X N O TE S : 1 D IM E N S IO N IN G & T O L E R A N C IN G P E R A N S I Y 1 4 .5 M , 1 9 8 2 . 2 C O N T R O L L IN G D IM E N S IO N : IN C H 2 .9 2 (.1 1 5 ) 2 .6 4 (.1 0 4 ) 3 O U T L IN E C O N F O R M S T O J E D E C O U T L IN E T O -2 2 0 A B . 4 H E A T S IN K & L E A D M E A S U R E M E N T S D O N O T IN C L U D E B U R R S . TO-220AB Part Marking Information EXAMPLE: THIS IS AN IRF1010 LOT CODE 1789 ASSEMBLED ON WW 19, 1997 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 7 = 1997 WEEK 19 LINE C 8 www.irf.com IRFB/IRFS/IRFSL52N15D D2Pak Package Outline 1 0.54 (.4 15) 1 0.29 (.4 05) 1.4 0 (.055 ) M AX. -A2 4.69 (.1 85) 4.20 (.1 65) -B 1.3 2 (.05 2) 1.2 2 (.04 8) 1 0.16 (.4 00 ) RE F. 6.47 (.2 55 ) 6.18 (.2 43 ) 15 .4 9 (.6 10) 14 .7 3 (.5 80) 5 .28 (.20 8) 4 .78 (.18 8) 2.7 9 (.110 ) 2.2 9 (.090 ) 2.61 (.1 03 ) 2.32 (.0 91 ) 1.3 9 (.0 5 5) 1.1 4 (.0 4 5) 8.8 9 (.3 50 ) R E F. 1.7 8 (.07 0) 1.2 7 (.05 0) 1 3 3X 1.40 (.0 55) 1.14 (.0 45) 3X 5 .08 (.20 0) 0 .93 (.03 7 ) 0 .69 (.02 7 ) 0 .25 (.01 0 ) M BAM 0.5 5 (.022 ) 0.4 6 (.018 ) M IN IM U M R E CO M M E ND E D F O O TP R IN T 1 1.43 (.4 50 ) NO TE S: 1 D IM EN S IO N S A FTER SO L D ER D IP. 2 D IM EN S IO N IN G & TO LE RA N C IN G PE R A N S I Y1 4.5M , 198 2. 3 C O N TRO L LIN G D IM EN SIO N : IN C H . 4 H E ATSINK & L EA D D IM EN S IO N S D O N O T IN C LU D E B UR R S. LE A D A SS IG N M E N TS 1 - G A TE 2 - D R AIN 3 - S O U RC E 8.89 (.3 50 ) 17 .78 (.70 0) 3 .8 1 (.15 0) 2 .08 (.08 2) 2X 2.5 4 (.100 ) 2X D2Pak Part Marking Information THIS IS AN IRF530S WITH LOT CODE 8024 ASSEMBLED ON WW 02, 2000 IN THE ASSEMBLY LINE "L" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER F530S DATE CODE YEAR 0 = 2000 WEEK 02 LINE L www.irf.com 9 IRFB/IRFS/IRFSL52N15D TO-262 Package Outline TO-262 Part Marking Information EXAMPLE: THIS IS AN IRL3103L LOT CODE 1789 ASSEMBLED ON WW 19, 1997 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 7 = 1997 WEEK 19 LINE C 10 www.irf.com IRFB/IRFS/IRFSL52N15D D2Pak Tape & Reel Information TR R 1 .6 0 (.0 6 3 ) 1 .5 0 (.0 5 9 ) 4 .1 0 ( .1 6 1 ) 3 .9 0 ( .1 5 3 ) 1 .6 0 (.0 6 3 ) 1 .5 0 (.0 5 9 ) 0.3 6 8 (.01 4 5 ) 0.3 4 2 (.01 3 5 ) F E E D D IR E C TIO N 1 .8 5 ( .0 7 3 ) 1 .6 5 ( .0 6 5 ) 1 1.6 0 (.4 57 ) 1 1.4 0 (.4 49 ) 1 5 .42 (.60 9 ) 1 5 .22 (.60 1 ) 2 4 .3 0 (.9 5 7 ) 2 3 .9 0 (.9 4 1 ) TRL 1 0.9 0 (.4 2 9) 1 0.7 0 (.4 2 1) 1 .75 (.06 9 ) 1 .25 (.04 9 ) 16 .1 0 (.63 4 ) 15 .9 0 (.62 6 ) 4 .7 2 (.1 3 6) 4 .5 2 (.1 7 8) F E E D D IR E C T IO N 13.50 (.532 ) 12.80 (.504 ) 2 7.4 0 (1.079 ) 2 3.9 0 (.9 41) 4 3 30 .00 ( 14.1 73 ) MAX. 6 0.0 0 (2.36 2) M IN . Notes: N O TE S : 1 . CO M F OR M S TO E IA -418 . 2 . CO N TR O L LIN G D IM E N SIO N : M IL LIM E T ER . 3 . DIM E NS IO N M EA S UR E D @ H U B. 4 . IN C LU D ES FL AN G E DIST O R T IO N @ O UT E R E D G E. 26 .40 (1 .03 9) 24 .40 (.9 61 ) 3 30.4 0 (1.19 7) M A X. 4 Repetitive rating; pulse width limited by max. junction temperature. Starting TJ = 25C, L = 0.72mH RG = 25, IAS = 36A. ISD 36A, di/dt 400A/s, VDD V(BR)DSS, TJ 175C. Pulse width 300s; duty cycle 2%. Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS . This is only applied to TO-220AB package. This is applied to D2Pak, when mounted on 1" square PCB ( FR-4 or G-10 Material ). For recommended footprint and soldering techniques refer to application note #AN-994. Data and specifications subject to change without notice. This product has been designed and qualified for the Automotive [Q101] (IRFB52N15D), & Industrial (IRFS/SL52N15D) market. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.12/01 www.irf.com 11 |
Price & Availability of IRFS52N15D |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |